Summary of Contents for Dakota Digital Retrotech RLC-69F-MUS
Page 1
RLC-69F-MUS Dakota Digital RLC Clock Installation For 1969-70 Ford Mustang Your new RLC-69F-MUS kit includes: HLC Clock Installation Manuals Harness 2X 3/8” Screws Installation 1. Remove the eight (8) screws securing the clock panel to the dash. Manual # 650713...
Page 2
2. Remove the gauge, bezel spacer, and lens from the clock panel. 3. Using the supplied 6-32 x 3/8” screws, attach the factory spacer to the stand-offs. 4. Attach the clock to the clock panel using the three factory screws from disassembly. Manual # 650713...
Page 3
5. Connect the clock harness to the back of the clock. Route the other end of this harness to the HDX control box. 6. Reinstall the assembly in to the dash and refer to the Operation Manual to complete the clock setup. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.