Page 1
RLC-40F Dakota Digital RLC Clock Installation For 1940 Ford Car Your new RLC-40F kit includes: RLC Clock Installation Manual Harness 4X 5/8” length Screws Installation 1. Remove the four screws holding the clock to the glove box on the back side.
Page 2
2. Remove the clock assembly and rear housing. 3. Carefully position the new clock from the backside to avoid scratching the chrome. With the four screws provided, secure the new clock to your original glove box. 4. Connect the clock harness to the back of the clock. Route the other end of the harness to the RTX control box and refer to the Operation Manual to complete the clock setup.