Advertisement
Regulation notices
Energy consumption (all countries)
• In order to limit energy consumption during times of non-use the PlotWave 450/550 printer /
multifunction Express has a Sleep mode during which the power level is reduced. The value
for the Sleep mode is listed in the Product Safety Data Sheet.
• Power Modes and Delay Times
The energy consumption and efficiency are influenced both by the product technology and by
the settings chosen by the user, especially the delay times that are selected to enter reduced
power states. The following delay times have been pre-set.
Operational mode
Sleep
The modes above are automatically entered after the Default Delay Time has elapsed; counting
from the moment the last print has been produced. These settings are recommended and for
most users ensure both ease of use and low energy consumption. Between brackets are the
minimum and maximum values. The Delay Times can be changed. Shorter delay times will
reduce energy consumption even further, but may cause longer recovery times. In some cases
longer delay times may prove to be more convenient, but it should be noted that this may
cause an increase in energy consumption. Therefore, from an energy preservation point-of-
view, longer delay times are not recommended.
Standby Power (Federal Energy Management Program) (all countries)
• This product meets the following criteria for the United States Federal Energy Management
Program (FEMP):
In Standby this product consumes 0 W. After shutting down all systems properly, the
Standby-mode as defined by FEMP is reached by switching the Main Switch to "0".
This product has a hard-off switch.
This product meets the ENERGY STAR® Guidelines for energy efficiency.
Electronic Product Environmental Assessment Tool (EPEAT) (all countries)
• This machine is not designed to prevent the use of toner manufactured by other companies
than Océ. Product performance related to use of toner is the responsibility of toner brand
owner.
Recycled paper (all countries)
• The use of recycled paper benefits the environment. The PlotWave 450/550 printer /
multifunction Express is designed to use recycled paper, including chlorine free paper, which
complies with the requirements of EN12281:2002.
18
Chapter 2 - Regulation notices
Default Delay Time [minutes]
60 minutes (range 5 - 240 minutes)
Advertisement
