Advertisement
Safety information (all countries)
CAUTION
• Some areas inside the machine become hot. Do not touch the locations which are labeled
with the "CAUTION HOT" symbol
• LCD display. Do not rub, press or touch the display surface with hard material, because the
polarizer at the surface can be easily scratched. The LCD module consists of glass. Therefore,
the LCD module can damage when you drop, pinch strongly or punch the module. When
glass breaks, be careful that you do not get injured by glass pieces. Call Customer Service.
Consumables, supplies and maintenance materials
WARNING
• Do not throw contaminated parts or parts containing toner or ink into an open flame.
• Do not leave toner or ink containing or contaminated parts within reach of children.
• Keep maintenance materials away from children.
• Be careful when handling fluids. Clean up spilled fluids immediately, to minimize the risk of
slipping and serious injury.
CAUTION
• Always use the materials which the manufacturer recommended and which are developed
for this machine. Materials not approved by the manufacturer may result in faults in your
machine.
• Use maintenance materials or other materials for their intended purpose only.
• Do not dispose additive residues, their mixture with water, and empty additive containers
with domestic waste but observe the manufacturer's stipulation.
IMPORTANT
• Do not place any liquids on the machine.
Moving the machine
WARNING
• Make sure that you disconnect the power cord and other cables before you move the
machine.
• Make sure that you check the documentation for the correct machine location before you
move the machine.
• Make sure that whenever the machine, or the optional elevation unit, is moved, this is done
by properly qualified people who have received adequate instructions.
10
Chapter 1 - Safety information
. Touching these areas could cause burns.
Advertisement
