Vanco HDEX60 Product Manual

Hdmi extender over cat5e/6 cable with ir and hdmi loop-out

Advertisement

Quick Links

HDEX60 Product Manual
HDMI Extender Over Cat5e/6 Cable
with IR and HDMI Loop-Out

Safety Instructions

For optimum performance and safety, please read these instructions carefully before use and keep this manual for
future reference. Please have the part number, serial number, and invoice available when requesting support.
• To prevent electric shock, please ensure that all apparatus is properly grounded.
• Place the device in a well-ventilated area, do not block any ventilation openings.
• Do not expose this apparatus to rain or place it near water. Any liquid that goes into the apparatus may cause a failure, fire,
or electric shock.
• Do not place the device on an uneven or unstable surface. The device may fall resulting in a malfunction.
• Never insert anything metallic into the open parts of this apparatus. This may cause a danger of electric shock.
• If a third-party power supply is used, please ensure that the power supply specifications meet the product requirements.

Introduction

The HDEX60 by Vanco extends 1080p high-definition video, audio, IR, and power up to 196ft (60m). Power over Ethernet
(PoE) technology transmits power over Cat5e/6 cabling to either the transmitter or receiver unit without the need for a
power supply. No EDID or EQ changes are necessary as the units automatically adjusts with dynamic EDID management.
HDMI loop-out is built into the transmitter for connecting additional local displays, AVR, or other system components. IR
pass-through also allows for source control from the display location.

Product Features

196ft (60m) transmission distance over a single Cat5e/6 cable
Power over Ethernet (PoE) provides power to either unit
HDMI loop-out on the transmitter splits or cascades signals for additional components
IR pass-through from the receiver to the transmitter with provided IR cables
Supports 1080p @ 60Hz resolutions
Compatible with Dolby, DTS, and PCM audio formats
Dynamic EDID management
HDCP compliant
Includes DC 5V/1A power supply and adapter
HDEX60 Product Manual
©2023 Vanco International LLC | Batavia, IL 60510 USA |
www.vanco1.com
Page 1 of 4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HDEX60 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Vanco HDEX60

  • Page 1 • If a third-party power supply is used, please ensure that the power supply specifications meet the product requirements. Introduction The HDEX60 by Vanco extends 1080p high-definition video, audio, IR, and power up to 196ft (60m). Power over Ethernet (PoE) technology transmits power over Cat5e/6 cabling to either the transmitter or receiver unit without the need for a power supply.
  • Page 2 8.5 oz (.242 kg) Power Supply 5V/1A DC Power Consumption(Max) Extender Unit Cert FCC, CE, RoHS Power Supply Cert FCC, CE, RoHS HDEX60 Product Manual ©2023 Vanco International LLC | Batavia, IL 60510 USA | www.vanco1.com Page 2 of 4...
  • Page 3 6. Power on each device in the same sequence. HDMI HDTV Loop-Out HDMI HDTV Cat5e/6 HDMI IR Signal RX Source Receiver RX Transmitter TX IR Signal TX HDEX60 Product Manual ©2023 Vanco International LLC | Batavia, IL 60510 USA | www.vanco1.com Page 3 of 4...
  • Page 4 Such specific warranties are available upon request to Vanco. A surge protector, power conditioner unit, or an uninterruptible power supply must be installed in the electrical circuit to protect against power surges.

Table of Contents