Software Update; Technical Data - Tech Controllers EU-WiFi 8S p User Manual

SOFTWARE UPDATE

X.
NOTE
Software update shall be conducted only by a qualified fitter. After the software has been updated, it is not
possible to restore previous settings.
In order to install new software, the controller must be unplugged from the power supply. Next, insert the flash drive
with the new software into the USB port. Switch the controller on. After the software update has been completed, the
controller restarts automatically.
NOTE
Do not switch the controller off while updating the software.
XI. TECHNICAL DATA
Specification
Power supply
Operation temperature
Maximum power consumption
Potential-free cont. nom. out. load
Frequency
Transmission
* AC1 load category: single-phase, resistive or slightly inductive AC load.
** DC1 load category: direct current, resistive or slightly inductive load.
The pictures and diagrams are for illustration purposes only.
The manufacturer reserves the right to introduce some hanges.
230V ±10%/50Hz
230V AC / 0,5A (AC1) *
24V DC / 0,5A (DC1) **
IEEE 802.11 b/g/n
28
Value
5°C÷50°C
1,5W
868MHz