Table of Contents
Advertisement
SOFTWARE UPDATE
In order to install new software, the controller must be unplugged from the power supply. Next, insert the flash drive
with the new software into the USB port. Connect the controller to the power supply. A single sound means that the
software update process has been initiated.
NOTE
Software update shall be conducted only by a
qualified fitter. After the software has been updated,
it is not possible to restore previous
USED SENSORS
KTY-81-210 -> 25°C – 2000 Ω
PT-1000 -> 0°C – 1000 Ω
settings.
The pictures and diagrams are for illustration purposes only.
The manufacturer reserves the right to introduce some hanges.
NOTE
After conducting the software update restart the
controller.
50
Advertisement
Table of Contents
Need help?
Do you have a question about the EU-i-2 and is the answer not in the manual?
Questions and answers