Split Times and Lap Times
Split time
●
A split time is the time elapsed from the start,
up to any point along the course of an event.
D
Start
Split 1
A
Split 2
A
Split 3
D
Goal
Lap time
●
A lap time shows the time elapsed during a
specific lap around a track, etc.
D
Start
Lap 1
A
Lap 2
A
Lap 3
D
Goal
Watch Operation Guide 5658
Measuring Elapsed Time
1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
1/100 seconds
Minutes, seconds
3.
Press (A) to reset the measurement time
to all zeros.
1.
Start
Stop
2.
Resume
Stop
3.
After first hour
Seconds
Hours, minutes
4.
Measuring a Split Time
Enter the Stopwatch Mode.
Navigating Between Modes
l
If a stopwatch timing operation is in
●
progress, press (D) to stop it and then
press (A) to reset the stopwatch to all
zeros before performing the operation
in step 2.
Press (A) to display [SPL].
Each press of (A) toggles between
●
[SPL] (split time) and [LAP] (lap time).
Minutes, seconds
Use the operations below to measure
elapsed time.
Pressing (A) displays the elapsed time
●
up to that point (split time), alternating
with [SPL] for about eight seconds.
D
Start
A
Split
D
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour
After first hour
1/100 seconds
Minutes, seconds
Hours, minutes
Press (A) to reset the measurement time
to all zeros.
Seconds
21