Stopwatch; Split Times And Lap Times; Measuring Elapsed Time; Measuring A Split Time - Casio G-Shock GST-B400 Operation Manual

After Arriving
●
1.
Swap the origin time zone time with the
destination time zone time.
Before swapping After swapping
Destination time
Destination time
Using G-SHOCK Connected to
l
Configure Settings
Using Watch Operations to Configure
l
Settings
2.
Enable auto time adjustment.
Using the Watch in a Medical Facility or
l
Aircraft
3.
Adjust the time setting.
Triggering Immediate Time Adjustment
l
Watch Operation Guide 5657
The stopwatch measures elapsed time in
1/100-second units for the first hour, and in 1-
second units after that for up to 24 hours.
In addition to normal elapsed time
measurements, the stopwatch also lets you
take split time and lap time readings.

Split Times and Lap Times

Split time
●
A split time is the time elapsed from the start,
up to any point along the course of an event.
Lap time
●
A lap time shows the time elapsed during a
specific lap around a track, etc.

Stopwatch

D
Start
Split 1
A
Split 2
A
Split 3
D
Goal
D
Start
Lap 1
A
Lap 2
A
Lap 3
D
Goal

Measuring Elapsed Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
2.
Use the operations below to measure
elapsed time.
Start
Stop
Resume
Stop
Elapsed time is shown in 1/100-second
●
units for the first hour of the
measurement. After the first hour,
elapsed time is shown in one-second
units.
First hour After first hour
1/100 seconds
Minutes, seconds Hours, minutes
3.
Press (A) to reset the stopwatch to all
zeros.

Measuring a Split Time

1.
Enter the Stopwatch Mode.
Navigating Between Modes
l
If a lap time measurement operation is
●
displayed, clear it before proceeding to
step 2.
Measuring Lap Times
l
2.
Press (A) to display [SPL].
Minutes, seconds
Seconds
19