Table of Contents
Advertisement
Linking with a Phone
While there is a Bluetooth connection
between the watch and phone (Mobile Link),
the watch's current time setting is adjusted
automatically. You can also change the
watch's other settings.
Note
This function is available only while
●
CASIO WATCHES is running on the
phone.
This section describes watch and
●
phone operations.
: Watch operation
X
: Phone operation
Y
Getting Ready
To use your watch in combination with a
phone, you first need to pair them. Perform the
steps below to pair the watch with a phone.
Install the app on your phone.
●
A
In Google Play or the App Store, search for the
"CASIO WATCHES" phone app and install it
on your phone.
Configure Bluetooth settings.
●
B
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
Pair the watch with a phone.
●
C
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2. Y
Tap the "CASIO WATCHES" icon.
3. Y
Tap the
of the "My Watch" tab.
4. Y
Perform the operation shown on the
phone screen to register the watch to the
CASIO WATCHES phone app.
Watch Operation Guide 5658
5. X
Hold down (C) for at least three seconds
until [CNCT] starts to flash. Release the
button when the function hand moves to
.
e
When a connection is established
between the watch and phone, [CNCT]
will stop flashing.
If pairing fails for some reason, [ERR]
●
will appear on the display momentarily
and then the watch will return to the
Timekeeping Mode. Perform the pairing
procedure again from the beginning.
Pairing started.
Note
The first time you start up CASIO
●
WATCHES phone app, a message will
appear on your phone asking if you
want to enable location information
acquisition. Configure settings to allow
background use of location
information.
Auto Time Adjustment
Your watch will connect with a phone at preset
times each day and adjust its time settings
automatically.
Using This Function
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Pairing complete.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
ー
ー
ー
ー
Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, adjust the hand
positions.
l
If there is a World Time City specified
●
with the CASIO WATCHES phone
app, its time will also be adjusted
automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
While the watch is too far away from
its paired phone
While communication is not possible
due to radio interference, etc.
While the phone is updating its
system
While the CASIO WATCHES phone
app is not running on the phone
Adjusting Hand Alignment
10
Advertisement
Table of Contents
