Do not operate the crown or buttons while ー retailer or to an authorized CASIO service Example of Daily Use your watch is submersed in water or wet. center. Hand washing, rain Avoid wearing your watch while in the ー ...
Page 3
Semi-transparent resin parts can become ● discolored due to sweat and dirt, and if Note that CASIO Computer Co., Ltd. exposed to high temperatures and humidity assumes no responsibility for any for long periods. damage or loss suffered by you or any Daily use and long-term storage of your ●...
When in a hospital, on an aircraft, or in any under applicable radio laws may be a other area where the use of radio waves is not criminal offense. For details, visit the CASIO allowed, use the operation below to stop radio Website.
Watch Operation Guide 5666 General Guide Watch Face Items Before Getting Started... The terms below are for the Calendar Mode. ① ② ③ ⑦ This section provides an overview of the watch ① and introduces convenient ways it can be ②...
Watch Operation Guide 5666 Stopwatch Mode ● Navigating Between Modes Mode Overview The second hand, and the small hour and Pressing (A) in the Calendar Mode enters the Calendar Mode minute hands indicate the elapsed stopwatch ● Stopwatch Mode and starts an elapsed time time.
Watch Operation Guide 5666 Using the Crown Hand and Day Indicator Charging Movement Fast Forward/Fast Reverse This watch runs on power supplied from a ● rechargeable (secondary) battery that is Crown charged by a solar panel. The solar panel is Day indicator integrated into the face of the watch, and power is generated whenever the face is...
Page 9
Watch Operation Guide 5666 Remaining Charge and Dead Battery Charging Time Guidelines Power Saving ● ● ● You can determine if the charge level is low by The table below shows guidelines for Leaving the watch in a dark location for about checking the hand movement.
Configure settings to allow Getting Ready background use of location For details about setting procedures, Your phone needs to have the CASIO ● information. ● see your phone documentation. “EDIFICE Connected” app installed to pair...
Watch Operation Guide 5666 Triggering Immediate Time Adjustment ● Auto Time Adjustment 3. Y Perform the operation shown on the The watch’s time setting will be adjusted phone screen to transfer data measured automatically whenever you establish a The watch will connect with a phone at preset connection between the watch and a phone.
Watch Operation Guide 5666 Configuring the Summer Time Setting Swapping Your World Time and Home ● ● Configuring World Time Time Settings 1. Y Tap the “EDIFICE Connected” icon. 1. Y Tap the “EDIFICE Connected” icon. Specifying a World Time City with EDIFICE 2.
Watch Operation Guide 5666 Adjusting Hand and Day Changing the Home City 2. X Hold down (B) for at least four seconds Indicator Alignment Summer Time Setting until the second hand points to A connection will be established between If the hands and/or day indicator are out of 1.
Watch Operation Guide 5666 Connection Canceling a Connection with a Unpairing Phone Use the procedure below to delete pairing Connecting with a Phone information from EDIFICE Connected. Pressing any button terminates the Bluetooth connection and returns the second hand to its This section explains how to establish a 1.
Watch Operation Guide 5666 Using Watch Operations to Time Adjustment Press (A). Adjust the Time and Day This enables the year one’s digit setting Settings operation. Your watch can connect with a phone to obtain information that it uses to adjust its date and Rotate the crown to move the second time setting.
Watch Operation Guide 5666 Configuring Dual Time Moving to Another Time Zone Stopwatch Settings Use the procedure below to easily change day and time settings of the watch to a destination Pressing (A) in the Calendar Mode enters the Dual Time lets you keep track of the current location.
Watch Operation Guide 5666 Lap Times ● Flyback Timing (Lap Timing) Example: Recording a Race A lap time is the time elapsed during a specific Lap Time lap or segment. Lap times are recorded internally by the watch. The watch displays the This section explains how to record lap times elapsed time of the current lap.
Watch Operation Guide 5666 Checking the Difference Configuring Alarm Settings Alarm Between the Current and Previous Lap Times Pull out the crown to the first click. The watch will beep when an alarm time is This causes the second hand to move to reached.
Watch Operation Guide 5666 Turning Off the Alarm Adjusting Hand and Press (B). Day Indicator This enables adjustment of hour hand, If you leave the alarm turned on, it will sound minute hand, and 24-hour hand every day at the preset alarm time. Alignment alignment.
Supported Phones Leaving the crown pulled out for more ● For information about phones that can than approximately 30 minutes without connect with the watch, visit the CASIO performing any operation will website. automatically cause the adjustment https://world.casio.com/os_mobile/wat/ operation to become disabled. If this...
Bluetooth SIG, Inc. and any use of such Direct Start marks by CASIO Computer Co., Ltd. is Did you install EDIFICE Connected on Starts stopwatch elapsed time under license. your phone? measurement from the Calendar iPhone and App Store are trademarks of ●...
Page 22
Watch Operation Guide 5666 I can’t reconnect the watch Phone-Watch Connection I changed the phone’s Bluetooth from enabled to disabled, and now I and phone. can’t connect anymore. I can’t establish a connection On the phone, turn Bluetooth off and then back between the phone and watch.
Page 23
Visit the website below. because you are outside its service range or Power Saving for some other reason, the watch may not be https://world.casio.com/support/ Watch is connected with a phone to adjust able to display the correct time. If this ●...
Need help?
Do you have a question about the Edifice EQB-1200D-2AER and is the answer not in the manual?
Questions and answers