Table of Contents
Advertisement
Turning Off an Alarm or the
Hourly Time Signal
To stop an alarm or the hourly time signal from
sounding, perform the steps below to turn it
off.
To have an alarm or hourly time signal
●
sound again, turn it back on.
Note
Indicators are displayed while any of
●
the alarms or the hourly time signal is
turned on.
The applicable indicators are not
●
displayed while all of the alarms are
turned off and/or the hourly time signal
is turned off.
Alarm
Hourly time signal
1.
Enter the Alarm Mode.
Navigating Between Modes
l
2.
Use (D) to scroll through the alarm ([AL1]
to [AL5]) and hourly time signal ([SIG])
screens until the one you want to turn off
is displayed.
Alarm or hourly time signal
Watch Operation Guide 5658
3.
Press (A) to turn off the displayed alarm or
the hourly time signal.
Each press of (A) toggles between ON
●
and OFF.
Turning off all alarms causes
●
(alarm) to disappear from the display.
Turning off the hourly time signal
causes
disappear.
4.
Hold down (C) for at least one second to
return to the Timekeeping Mode.
Note
If
●
you turn off an alarm, it means that at
least one of the other alarms is still
turned on. To turn off all of the alarms,
repeat steps 2 and 3 until the
(alarm) indicator is no longer
displayed.
(hourly time signal) to
(alarm) is still displayed after
Alarm Countdown Indication
30 minutes before an alarm time is reached, a
countdown start tone sounds and the function
hand starts to indicate the remaining time until
the alarm time.
Function hand
Note
You can use the procedure below to
●
enable or disable the countdown start
tone.
Disabling the Countdown Start
l
Tone
During a period within 30 minutes of
●
both an alarm time and the end of a
timer operation, the function hand
indicates the timer countdown.
19
Advertisement
Table of Contents
