Using The Watch In A Medical Facility Or Aircraft - Casio EDIFICE ECB-S100D-2A Operation Manual

3.
Keep pressing (C) until the setting you
want to change is flashing.
Each press of (C) moves the flashing to
●
the next setting in the sequence shown
below.
Home City
Summer time
Seconds
Hours
Minutes
Year
Month
Day
12/24-hour timekeeping
Day of the week language
Countdown Start Tone On/Off
Operation tone enable/disable
Illumination duration
Auto time adjustment
Power Saving
4.
Configure the date and time settings.
To reset the seconds to 00: Press (D).
●
1 is added to the minutes when the
current count is between 30 and 59
seconds.
Use (B) and (D) to change the other
●
settings.
Watch Operation Guide 5658
5.
Repeat steps 3 and 4 to select time and
date settings.
6.
Press (A) to complete the setting
operation.
Switching between 12-hour and 24-
●
hour Timekeeping
You can specify either 12-hour format or 24-
hour format for the time display.
1.
Enter the Timekeeping Mode.
Navigating Between Modes
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
3.
Press (C) eight times.
This causes [12H] or [24H] to flash on the
display.
4.
Press (D) to toggle the setting between
[12H] (12-hour timekeeping) and [24H]
(24-hour timekeeping).
12-hour timekeeping
5.
Press (A) to complete the setting
operation.
Using the Watch in a Medical
Facility or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where connection with
a phone may cause problems, you can
perform the procedure below to disable auto
time adjustment. To re-enable auto time
adjustment, perform the same operation
again.
1.
Enter the Timekeeping Mode.
l
2.
Hold down (A) for at least two seconds.
Release the button when the name of the
currently selected Home City appears on
the display.
Home City
3.
Press (C) 13 times (or 14 times).
4.
Press (D) to toggle between the auto time
adjustment settings.
5.
Press (A) to complete the setting
24-hour timekeeping
operation.
Note
●
Navigating Between Modes
This is the setting mode. The hands
●
automatically shift out of the way for
easy viewing of the display and other
indicators.
Home City
This displays [RCVD].
[OFF]: Auto time adjustment disabled.
[ON]: Auto time adjustment enabled.
The auto time adjustment setting can
be changed only while the watch is
paired with a phone.
16