Table of Contents
Advertisement
Operating your fireplace
Preventing inadvertent ignition
You can use one of the two following methods to
make sure that your fi replace will not turn on when
you don't want it on.
• On gas valve, turn dial from ON position to MAN
position as shown. Turning dial to MAN will make
sures that main burner cannot come on. The pilot
will remain on if lit.
ON
• Alternately, remove all batteries from the battery
holder next to receiver as well as from the handset.
Fireplace
Battery
holder
Receiver
Battery holder located next to receiver on
bottom of fi replace under removable panel.
10
Gas
valve
Wall
switch
Gas
valve
Automatic shut-off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See Remote Control handbook or
valorfi replaces.com/remotes
feature.
for a description of this
Advertisement
Table of Contents
