Operating your fireplace
Preventing inadvertent ignition
You can use one of the two following methods to
make sure that your fireplace will not turn on when
you don't want it on.
• On manual ON/OFF switch at the right of the gas
valve, press the O button*.
*Ensure to press the I button before putting the
fi replace in operation.
Manual On-Off Switch
• Alternately, remove all batteries from the battery
holder next to receiver as well as from the handset.
Fireplace
Gas
Receiver
valve
Battery holder located next to gas valve on
bottom of fi replace behind access panel/fret
10
ON
OFF
Battery
holder
Automatic shut-off (in certain conditions)
Your fireplace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See Remote Control handbook or
valorfireplaces.com/remotes
feature.
for a description of this