Table of Contents
Advertisement
Operating your fireplace
Preventing inadvertent ignition
You can use one of the following two methods
to ensure that your fireplace will not turn on
unexpectedly.
WARNING
Risk of severe burns! Surface of the
fi replace are very hot during operation!
Ensure fi replace has cooled off before
accessing control.
• On the gas valve, turn dial from ON position to
MAN* position as shown. Turning the dial to MAN
will ensure that main burner cannot come on. The
pilot will remain ON if lit.
Gas
valve
• Alternately, remove all batteries from the battery
holder in the control area (see next page), and the
handset.
* To activate the fireplace again, turn dial back from
MAN to ON position.
10
ON
Automatic shut-off (in certain conditions)
Your fireplace's remote control is equipped with an
automatic shut-off mechanism which is activated
in certain conditions. See Remote Control Operation
at Appendix A or
valorfireplaces.com/remotes
description of this feature.
for a
Advertisement
Table of Contents
