Operating your fireplace
Preventing inadvertent ignition
You can use one of the following two methods
to ensure that your fi replace will not turn on
unexpectedly.
WARNING
Risk of severe burns! Surface of the
fi replace are very hot during operation!
Ensure fi replace has cooled off before
accessing control.
• Press the O button on the manual on/off switch on
the right hand side of the valve*, behind the trim.
ON/OFF Manual Switch
• Alternately, remove all batteries from the battery
holder in the control area (see next page), and the
handset.
* To activate the fi replace again, press on I.
10
ON
OFF
Automatic shut-off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated
in certain conditions. See Remote Control Operation
at Appendix A or
valorfi replaces.com/remotes
description of this feature.
for a