Table of Contents
Advertisement
About these instructions
This documentation applies to the smd frequency inverter, and contains important technical data and
describes installation, operation, and commissioning.
These instructions are only valid for smd frequency inverters with software rev 20 (see drive nameplate).
Please read the instructions before commissioning.
A
TYPE:
ESMD223l4TXA
ID-NO: 004 9 0 812
Made in USA
Inverter
smd
- Full I/O
A Certifications
B Type
Scope of delivery
• 1 smd inverter (ESMD...)
with EPM installed
(see Section 4.2)
• 1 Operating Instructions
© 2004 Lenze AG
No part of this documentation may be copied or made available to third parties without the explicit written approval of
Lenze AG.
All information given in this documentation has been carefully selected and tested for compliance with the hardware and
software described. Nevertheless, discrepancies cannot be ruled out. We do not accept any responsibility nor liability for
damages that may occur. Any necessary corrections will be implemented in subsequent editions.
2
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
C
B
INPUT
3/PE
400/480 V
52 / 45 A
50-60 Hz
C Input Ratings
D Output Ratings
Important
After receipt of the delivery, check immediately whether the items
delivered match the accompanying papers. Lenze does not accept any
liability for deficiencies claimed subsequently.
Claim
• visible transport damage immediately to the forwarder.
• visible deficiencies/incompleteness immediately to your Lenze
representative.
ENGLISH
D
OUTPUT
3/PE
For detailed information
0-400 / 460 V
refer to instruction
46 / 40 A
22 KW
00490252012345678
0-240 HZ
ESMD223L4TXA000XX XX XX
E Hardware Version
F Software Version
E F
Manual: SL03
V0011
Advertisement
Table of Contents
