Troubleshooting - Nikon D2Xs Manual

Troubleshooting

This section lists the indicators and error messages that appear in the view-
fi nder, control panel, and monitor when there is a problem with the camera.
Con sult the list below before contacting your retailer or Nikon representa-
tive.
Indicator
Control View-
panel fi nder
Lens aperture ring is not set to
(blinks) minimum aperture.
Low battery.
Battery exhausted.
(blinks) (blinks)
Battery can not be used.
(blinks) (blinks)
No lens attached, or non-
CPU lens attached without
specifying maximum aperture.
Aperture shown in stops from
maximum aperture.
Camera unable to focus using
(blinks) autofocus.
Subject too bright; photo will
be overexposed.
Subject too dark; photo will be
underexposed.
258
Understanding Error Messages and Displays
Problem Solution
Set ring to minimum aperture
(largest f/-number).
Ready a fully-charged spare
bat tery.
Replace battery.
Contact Nikon-authorized ser-
vice representative.
Aperture value will be dis-
played if maximum aperture
is specifi ed.
Focus manually.
• Use a lower ISO sensitivity
• Use optional ND fi lter
• In ex po sure mode:
S Increase shutter speed
A Choose a smaller ap er ture
(larg er f/-number)
• Use a higher ISO sensitivity
• Use optional Speedlight
• In ex po sure mode:
S Lower shutter speed
A Choose a larger ap er ture
(smaller f/-number)
20
27
27
27
133
85
52
249
90
92
52
108
90
92