Nikon D2Xs Manual page 107

Non-CPU Lenses
If the maximum aperture of the lens has been specifi ed
using the Non-CPU lens data item in shooting menu
( 131) when a non-CPU lens is attached, the current
f/-number will be displayed in the viewfi nder and top
control panel, rounded to the nearest full stop. Other-
wise the aperture displays will show only the number of stops (
erture displayed as
Exposure Warning
If the camera is unable to produce the correct exposure at the selected aperture, the
electronic analog exposure display (
un der- or over-exposure and one of the fol low ing in di ca tors will be dis played in the
con trol panel and viewfi nder shutter-speed displays:
Indicator
Subject too bright. Choose smaller aperture (larger f/-number) or lower ISO sensitivity
( 52), or use optional Neutral Density (ND) fi lter.
Subject too dark. Choose larger aperture (smaller f/-number) or higher ISO sensitivity
( 52), or use optional Speedlight.
Aperture Lock
Aperture can be locked at the selected setting (
b3—EV Step (
This option controls whether changes to shutter speed and aperture are made in in cre -
ments equiv a lent to
f6—Command Dials (
Command dials > Change main / sub and Command dials > Aperture setting con-
trol whether aperture is assigned with the main command dial, the sub-command dial,
or the lens aperture ring. Regardless of the settings chosen, the command dials are
always used with type G lenses, the lens aperture ring with non-CPU lenses.
) and the f/-number must be read from the lens aperture ring.
95) in the viewfi nder will show the amount of
192)
/
1 EV (the default setting), ½ EV, or 1 EV.
3
210)
Description
96).
, with maximum ap-
93