Lcd Brightness; Mirror Lock-Up - Nikon D2Xs Manual

LCD Brightness

To adjust monitor brightness, highlight LCD
brightness in the setup menu ( 213) and press
the multi selector to the right. The menu shown
at right will be displayed. Press the multi selector
up to increase brightness, down to decrease. The
num ber to the right of the dis play indicates the
cur rent bright ness level, with +2 the brightest setting and –2 the darkest.
Press the multi selector to the right to complete the operation and return to
the set up menu.

Mirror Lock-up

This option is used to lock the mirror in the up
position to allow inspection or cleaning of the
low-pass fi lter that protects the image sensor.
See "Technical Notes: Caring for the Camera"
( 253). Highlighting this option and pressing
the multi selector to the right displays the menu
shown above. If the multi selector is pressed to the right again, a row of
dashes ("– – – – – – ") will be displayed in the top control panel. To raise the
mirror, press the shutter-release button. The mirror will be locked in the up
position the row of dashes will blink. The mirror will be lowered when the
camera is turned off. Mirror lock up is not available when the battery level is
or lower or while a multiple exposure is being recorded.
215