Image Authentication - Nikon D2Xs Manual

Network Settings
Adjust network settings for connection to the
server. Press the multi selector up or down to
highlight an option and then press the multi se-
lector to the right.
Option
Load Load Wireless, TCP/IP, and FTP set-
settings fi le? tings from camera memory card.
Adjust settings for connection to wire-
Wireless
less network.
Adjust TCP/IP settings, including IP ad-
TCP/IP
dress, DNS, and gateway settings.
Enter password and user ID and adjust
FTP
settings for connection to ftp server.

Image Authentication

Selecting On for this option embeds image au-
thentication information into photographs as they
are taken, allowing alterations to the image to be
detected using Nikon's optional Image Authenti-
cation software (
cation on or off, highlight Image authentication
in the setup menu (
multi selector up or down to highlight an option and press the multi selector
right to select. Photographs taken with image authentication on are marked
by a icon on page 2 of the playback information display (
Image Transfer
Modifi cations to color profi les or IPTC information made in PictureProject during
transfer will be detected by Nikon's Image Authentication software. Turn auto embed
options off when transferring photographs for use with Image Authentication. Image
authentication information is not embedded in TIFF photographs recorded directly to a
computer using Camera Control Pro (available separately).
Copies
Image authentication information is not embedded in copies created with Trim (
123) or Image overlay (
Description
250). To turn image authenti-
213) and press the multi selector to the right. Press the
118).
139).
231