Auto Image Rotation - Nikon D2Xs Manual

Auto Image Rotation

The D2Xs is equipped with a built-in sensor that detects camera orientation.
Information from this sensor can be embedded in photographs as they are
taken, allowing portrait (tall) orientation photos to be rotated automatically
during playback or when the pictures are displayed in Capture NX (available
separately) or PictureProject.
Highlight Auto image rotation in the setup
menu ( 213) and press the multi selector to
the right. Press the multi selector up or down
to highlight an option, then press to the right to
make a selection.
Option
Camera records whether shots are in landscape (wide) orientation, portrait
(tall) orientation with the camera rotated 90 ° clockwise, or portrait orienta-
tion with the camera rotated 90 ° counter-clockwise.
Rotate tall during playback (
displayed in portrait orientation in camera monitor.
On
(default)
Landscape (wide)
orientation
Camera orientation not recorded. PictureProject and Capture NX display
all photographs in landscape (wide) orientation. Choose this option when
Off
taking pictures with lens pointing up or down.
* In C (continuous high speed) and C
H
tion recorded for fi rst shot applies to all images in same burst, even if camera orienta-
tion is changed during shooting.
218
Description
167), portrait orientation photos will be
Camera rotated 90 °
clockwise
(continuous low speed) modes (
L
* If On is selected for
Camera rotated 90 °
counter-clockwise
43), orienta-