Nikon D2Xs Manual page 221

Custom Setting f2: When Multi Selector Is Pressed
If desired, the multi selector can be used to ac-
tivate the exposure meters or initiate autofocus.
Highlight f2 Multi selector in the second level
of the CSM menu (
selector to the right. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.
Option
Do nothing
(default)
Reset mtr-off delay Pressing multi selector activates exposure meters.
Initiate autofocus
Custom Setting f3: Role of Multi Selector in Full-Frame Playback
By default, pressing the multi selector up or down
during playback displays the other images on the
memory card, while pressing the multi selector
left or right changes the photo information dis-
played. These roles can be reversed using Custom
Setting f3. Highlight f3 Photo info/playback in
the second level of the CSM menu (
the right. Press the multi selector up or down to highlight an option, then
press to the right to make a selection.
Option
Press multi selector up or down to display additional images, left or
Info /PB▲▼
right to change photo info displayed.
(default)
Press multi selector up or down to change photo info displayed,
Info▲▼/PB
left or right to display additional images.
181) and press the multi
Multi selector does not activate exposure meters or initiate
autofocus.
In AF-S or AF-C mode, pressing multi selector activates expo-
sure meters. Camera focuses while multi selector is pressed.
Description
181) and press the multi selector to
Description
207