Replacing The Fuel Hose; Vibration Damping System - Husqvarna Zenoah GZ2700T Workshop Manual

NOTE!
Fluted pliers may not be used with the fuel
hose. They can cause material damage
resulting in damage to the fuel hose.

7.22 Replacing the fuel hose

1
Remove the air filter cover, air filter and carburetor.
Remove the fuel filter as outlined in Figure 55.
2
Carfully pry open the engine case cover with a flat
screwdriver. See Figure 57.
3
Remove the two parts of the fuel hose as outlined
in Figure 58.
4
When assembling, make sure that the fuel hose is
fitted into the groove as outlined in Figure 58.

7.23 Vibration damping system

The vibration damping system consists of three
antivibration element. See Figure 59.
Dismantling the dampers
Make sure to dismantle the dampers in the order
that follows.
Fig 57
Fig 58
Fig 59
Repair instructions
43
English –