Husqvarna Zenoah GZ2700T Workshop Manual page 49

Repair instructions
7
Remove the screws and remove the oil system.
See Figure 71.
8
Remove the inlet pipe cover.
Loosen the screws holding the inlet pipe and re-
move the inlet pipe.
Remove the screws attaching the the crankcase
and cylinder to the chassis.
Remove the crankcase and cylinder. See Figure 72.
9
Loosen the four cylinder screws and carfully pull
out the cylinder and the gasket. See Figure 73.
48
– English
Fig 71
Fig 72
Fig 73