Repair instructions
7.19 Replacing the fuel filter
NOTE!
Fluted pliers may not be used with the fuel
hose. They can cause material damage
resulting in damage to the fuel hose.
1
When replacing the fuel filter, the old fuel filter must
be taken out of the tank unit using the
special 502 50 83-01 tool.
2
Pull out the fuel hose from the tank unit so that the
fuel filter can be removed. See Figure 55.
3
Fit the new fuel filter and refit the fuel hose with
filter in the tank unit.
7.20 Replacing the suction hose/return
hose
1
Dismantle the filter cover and the air filter.
2
Unsnap the return hose and the suction hose from
the fuel pump and the carburettor and the tank unit.
Replace hoses if necessary.
7.21 Replacing the fuel pump
1
Unsnap the suction hose (D) and return hose (C)
from the fuel pump (A). See Figure 56.
2
Pull out the fuel pump attachment (B). See Figure
56.
3
Press in the hooks to unsnap the fuel pump from
the fuel pump attachment. See Figure 56.
4
Fit the new fuel pump to the attachment.
5
Refit the fuel pump attachment. See Figure 56.
Attach the suction hose (D) and return hose (C) to
the fuel pump.
42
– English
Fig 55
B
A
C
D
Fig 56