Sending A Query - Motorola APX 8000 User Manual
Hide thumbs
Also See for APX 8000:
- Quick start manual ,
- User manual (112 pages) ,
- Quick reference card (2 pages)
Table of Contents
Advertisement
7.17.2
Sending a Query
Prerequisites:
This feature is available for radio users who have successfully logged in with the Two-Factor
Authentication. Query is a special form of Quick Text marked with a flag that is replied or dispatched in
normal TMS message. The query template needs to be configured in the quick test list of the CPS. You
can choose from the quick text list, including queries if present.
You shall receive a service advertisement message to indicate the Query is available after you have
successfully logged in the radio with a Two-Factor Authentication.
NOTE: The query server must be selected as the destination so that it can receive the query
message and respond the query with text message. The query server must be an entry in the
data user list in the CPS.
Procedure:
1 Perform one of the following actions:
•
To access this feature using the preprogrammed button, press the preprogrammed TMS
Query button and proceed to
•
To access this feature using the menu, proceed to the next step.
2
or to TMS and press the Menu Select button directly below TMS to access the TMS feature
screen.
3 Perform one of the following actions:
•
or
to Compose and press the Menu Select button directly below Sel.
•
Press the Menu Select button directly below Exit to return to the Home screen.
4
or
to Query and press the Menu Select button directly below Sel for a predefined
message.
5
or
to scroll through the list of messages and press the Menu Select button directly below
Sel to select the required message.
The message appears on the Compose screen, with a blinking cursor at the end of it.
6 Use the keypad to edit the message, if required.
7 Press the Menu Select button directly below Optn.
8
or
to Send Message and press the Menu Select button directly below Sel.
9 Perform one of the following actions:
•
or
to scroll through the address list and highlight the required address.
•
or
to [Other Recpnt] and press the Menu Select button below Edit. A blinking
cursor appears on the Enter Address screen. Use the keypad to type the address entry.
10 Press the Menu Select button below Send or the PTT button to send the message.
The display shows the Send Message screen and Sending msg.
If the message is sent, you hear a tone and the display shows Msg sent.
step
5.
MN001425A01-AW
Chapter 7 : Advanced Features
95
Advertisement
Table of Contents
