Logging Out Of Two-Factor Authentication - Motorola APX 8000 User Manual

MN001425A01-AW
Chapter 7 : Advanced Features
• or to [UnitID Entry] and press the Menu Select button directly below Edit. A
blinking cursor appears. Use the keypad to type or edit a Unit ID. Press the Menu Select
button directly below Ok to submit.
• or to scroll through the list of predefined Unit IDs. Press the Menu Select button
directly below Sel to select the predefined Unit ID.
• Press and hold
Press the Menu Select button directly below Sel to select the predefined Unit ID.
If the selected predefined Unit ID has more than the maximum allowed characters, or an invalid
character in it, the display shows momentary Invalid UnitID.
4 Enter your password when you see a blinking cursor.
5 Press the Menu Select button directly below Logn or Ok.
If only one-factor is enabled, the display shows 1F logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login failed. The display returns to User Login
screen.
6 For radio enabled with two-factor login, enter your passcode when you see a blinking cursor.
7 Press the Menu Select button directly below Logn.
The display shows In progress.
If the login fails, the display shows momentary 2F pscd failed. Press the Menu Select button
directly below Pscd to re-enter passcode. If successful, the display shows User Login screen with 2F
logged in status to indicate Two-Factor Authentication complete.
7.17.1.2

Logging out of Two-Factor Authentication

When and where to use:
NOTE: Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder.
The next user is able to access the Inbox, Draft, and Sent messages if private data is not
deleted.
Radio that is successfully logged in to the secured system receives advertisement from the
server that the access to the data for query is enabled.
Procedure:
1 Press the Menu Select button directly below Logt.
One of the following scenarios occurs:
• The display shows Clear private data?.
• If the Delete Messages On Session End feature is enabled, the display shows momentary
Private data cleared.
2 Select Yes to clear all your private data or select No to keep your private data.
If you select Yes, the display shows momentary Private data cleared.
94
or to scroll through the list of predefined Unit IDs at a fast scroll rate.