Motorola APX 8000 User Manual page 36

MN001425A01-AW
Chapter 4 : Status Indicators
You Hear Tone Name
Fall Alert (Man Down)
Entry
Long, Low- Time-Out Timer Timed
Pitched Out
Tone
Talk Prohibit/PTT In-
hibit
Lack of Voice PTT
Time out
Out of Range
Invalid Mode
A Group of Busy
Low-Pitch-
ed Tones
Short, Me- Valid Key-Press
dium-Pitch-
Radio Self Test Pass
ed Tone
Clear Voice
Priority Channel Re-
ceived
Emergency Alarm/Call
Entry
Central Echo
Long, Medi- Volume Set
um-Pitched
Emergency Exit
Tone
A Group of Failsoft
Medium-
Automatic Call Back
Pitched
Keyfail
Tones
Console Acknowledge
Received Individual
Call
Call Alert Sent
Site Trunking
Two Short, Over-the-Air Program-
Medium- ming request
Pitched
Tones
36
Heard
When radio initiates Fall Alert mode.
After time out.
(When PTT button is pressed) transmissions are not
allowed.
When the radio ends your call after it detected there is
lack of voice for 60 seconds after the PTT is pressed
and hold. Your radio ends the call to enable your radio
to receive calls from other radio users. The duration of
this timer can be preprogrammed by a qualified radio
technician.
(When PTT button is pressed) the radio is out of range
of the system.
When radio is on an unpreprogrammed channel.
When system is busy.
When a correct key is pressed.
When radio passes its power-up self test.
At beginning of a non-coded communication.
When activity on a priority channel is received.
When entering the emergency state.
When central controller has received a request from a
radio.
When volume is changed on a quiet channel.
When exiting the emergency state.
When the trunking system fails.
When voice channel is available from previous request.
When encryption key has been lost.
When status, emergency alarm, or reprogram request
ACK is received.
When Call Alert or Private Call is received.
When Call Alert is received by the target radio.
When a SmartZone trunking system fails.
When the radio receives an over-the-air programming
request.