Logging Out Of Two-Factor Authentication; Sending A Query - Motorola APX 2000 User Manual

4 Enter your password when you see a blinking cursor.
5 Press the Menu Select button directly below Logn or Ok.
If only one-factor is enabled, the display shows 1F logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login failed. The display returns to User Login
screen.
6 For radio enabled with two-factor login, enter your passcode when you see a blinking cursor.
7 Press the Menu Select button directly below Logn.
The display shows In progress.
If the login fails, the display shows momentary 2F pscd failed. Press the Menu Select button
directly below Pscd to re-enter passcode. If successful, the display shows User Login screen with 2F
logged in status to indicate Two-Factor Authentication complete.
7.17.1.2

Logging out of Two-Factor Authentication

When and where to use:
NOTE: Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder.
The next user is able to access the Inbox, Draft, and Sent messages if private data is not
deleted.
Radio that is successfully logged in to the secured system receives advertisement from the
server that the access to the data for query is enabled.
Procedure:
1 Press the Menu Select button directly below Logt.
One of the following scenarios occurs:
• The display shows Clear private data?.
• If the Delete Messages On Session End feature is enabled, the display shows momentary
Private data cleared.
2 Select Yes to clear all your private data or select No to keep your private data.
If you select Yes, the display shows momentary Private data cleared.
7.17.2

Sending a Query

Prerequisites:
This feature is available for radio users who have successfully logged in with the Two-Factor
Authentication. Query is a special form of Quick Text marked with a flag that is replied or dispatched in
normal TMS message. The query template needs to be configured in the quick test list of the CPS. You
can choose from the quick text list, including queries if present.
You shall receive a service advertisement message to indicate the Query is available after you have
successfully logged in the radio with a Two-Factor Authentication.
NOTE: The query server must be selected as the destination so that it can receive the query
message and respond the query with text message. The query server must be an entry in the
data user list in the CPS.
68012005014-HV
Chapter 7 : Advanced Features
93