Table of Contents
Advertisement
●
Press and hold
the Menu Select button directly below Sel to select the predefined Unit ID.
If the selected predefined Unit ID has more than the maximum allowed characters, or an invalid
character in it, the display shows momentary Invalid UnitID.
4. Enter your password when you see a blinking cursor.
5. Press the Menu Select button directly below Logn or Ok.
If only one-factor is enabled, the display shows 1F logged at the status. The login operation is
complete.
If login fails, the display shows momentary Login failed. The display returns to User Login
screen.
6. For radio enabled with two-factor login, enter your passcode when you see a blinking cursor.
7. Press the Menu Select button directly below Logn.
The display shows In progress.
Result: If the login fails, the display shows momentary 2F pscd failed. Press the Menu Select button
directly below Pscd to re-enter passcode. If successful, the display shows User Login screen with 2F
logged in status to indicate Two-Factor Authentication complete.
7.17.1.2
Logging out of Two-Factor Authentication
When and where to use:
NOTE: Private data refers to all messages in the text messaging Inbox, Draft, and Sent folder. The
next user is able to access the Inbox, Draft, and Sent messages if private data is not deleted.
Radio that is successfully logged in to the secured system receives advertisement from the server that
the access to the data for query is enabled.
Procedure:
1. Press the Menu Select button directly below Logt.
One of the following scenarios occurs:
●
The display shows Clear private data?.
●
If the Delete Messages On Session End feature is enabled, the display shows momentary
Private data cleared.
2. Select Yes to clear all your private data or select No to keep your private data.
If you select Yes, the display shows momentary Private data cleared.
7.17.2
Sending a Query
Prerequisites:
This feature is available for radio users who have successfully logged in with the Two-Factor Authentication.
Query is a special form of Quick Text marked with a flag that is replied or dispatched in normal TMS
message. The query template needs to be configured in the quick test list of the CPS. You can choose from
the quick text list, including queries if present.
or
to scroll through the list of predefined Unit IDs at a fast scroll rate. Press
MN004478A01-AN
Chapter 7: Advanced Features
95
Advertisement
Table of Contents
