Remote Monitor; Contacts - Motorola APX 8000 User Manual

Hide thumbs Also See for APX 8000:
Table of Contents

Advertisement

MN001425A01-AW
Chapter 7 : Advanced Features
5 Press the Menu Select button directly below Clon to begin cloning.
The radio displays Enter password if the protected target zone is selected.
6 Enter the password and press the Menu Select button directly below Ok to start cloning.
The radio displays Cloning...<Current cloning zone>. One of the following scenarios occurs:
If the cloning is successful, a tone sounds, the radio displays Clone successful and the source
zone alias is displayed on the right.
If the cloning is not successful, a tone sounds and the radio displays Clone failed. Press the
Back button to enter the source zone list.
If you press the Home button, the radio aborts cloning.
NOTE: The target radio enters programming mode during cloning and resets after cloning is
completed.
7.3

Remote Monitor

This feature allows the system administrator to turn on the microphone of a targeted radio with a
subscriber alias or ID.
When remote monitor feature is activated, the audio transmission can be configured in Customer
Programming Software (CPS) to route the audio to the radio internal microphone, wired Remote
Speaker Microphone (RSM), or Bluetooth wireless microphone.
In life-threatening or critical situations, the system administrator can remotely monitor any audible
activity surrounding the targeted radio.
7.4

Contacts

This feature only supports Model 3.5 and Model 2.5.
This feature provides "address-book" capabilities on your radio. Each entry corresponds to an alias
(name) and ID (number) that you use to initiate a call. Contact entries are alphabetically sorted
according to the entry alias.
Each entry, depending on context (conventional, trunking, or phone), associates with one to five IDs
according to the following types of calls:
Phone Call
Private Call
Selective Call
Call Alert
Each entry within Contacts contains the following information:
Call Alias (Name)
Call ID (Number)
Call Type (Icon)
WACN ID (ASTRO 25 Trunking IDs only)
System ID
Your radio must be programmed to allow you to add, edit, or delete the contact entries.
58

Advertisement

Table of Contents
loading

Table of Contents