Initializing The System; Initializing The Controller; Initializing The Code Reader - Omron V460-H Series Connection Manual

8. Initializing the System

This document assumes that each device uses the factory default settings.
If you change their settings from the defaults, you may not be able to perform various setting
procedures as described.

8.1. Initializing the Controller

To initialize the controller, initialize the CPU Unit.
Before initialization, place the controller in PROGRAM mode, and select Clear All Memory
from Controller Menu in the Sysmac Studio. When the Clear All Memory Dialog Box is
displayed, confirm the contents and click OK.

8.2. Initializing the Code Reader

For information on initializing the code reader, please refer to How to initialize the settings? in
8-3 Q&A of the V460-H Industrial Handheld DPM Reader User Manual (Cat. No. Z461).
8. Initializing the System
24