Omron V460-H Series Connection Manual page 21

Industrial handheld dpm reader

Hide thumbs Also See for V460-H Series:

Table of Contents

7.3.3.

Going Online and Transferring the Project Data

Place the Sysmac Studio online and transfer the project data to the controller.

Select Communications Setup

from the Controller Menu.

The Communications Setup

Dialog Box is displayed.

In Connection type, select the

Direct connection via USB

Option.

Click OK.

Select Online from the

Controller Menu.

A confirmation dialog box

appears. Click Yes.

* The dialog box displayed

differs depending on the status

of the controller being used.

Select Yes to proceed with the

operation.

* The serial IDs displayed vary

depending on the device.

7. Connection Procedure

Table of Contents