Code Reader Setup - Omron V460-H Series Connection Manual

Industrial handheld dpm reader

Hide thumbs Also See for V460-H Series:

Table of Contents

7.2. Code Reader Setup

Set up the code reader.

Precautions for Correct Use

Use a PC (personal computer) to set the parameters for the code reader.

Note that you may need to change the PC settings depending on the condition of your PC.

7.2.1.

Setting the Parameters

Set the parameters for the code reader.

Set the IP address of your PC to 192.168.188.100 and its subnet mask to 255.255.0.0.

Connect the cord reader and the

switching hub to the PoE

injector with cables.

Connect the PC to the switching

hub with a LAN cable.

Connect 24 VDC power supply

(for the switching hub) to the

switching hub.

Set the IP Address of the PC.

For the IP address, enter

192.168.188.100. For the

subnet mask, enter 255.255.0.0.

For the procedure to open the

screen on the right, please refer

to the next step 4.

Switching hub

PoE hub

W4S1-05C

LAN cable

7. Connection Procedure

V460-H0PX

Ethernet

cable

24 VDC power supply

Table of Contents