Omron V460-H Series Connection Manual page 22

Note
Refer to Section 6 Online Connections to a Controller in the Sysmac Studio Version 1
Operation Manual (Cat. No. W504) for details on online connection to the controller.
4 When you are online, a yellow
border appears in the upper part
of the Edit Pane.
5
Select Synchronize from the
Controller Menu.
6
The Synchronization Dialog Box
is displayed.
Confirm that the check box for
the data to transfer (i.e., NJ301
on the figure on the right) is
selected, and click Transfer to
Controller.
7
A confirmation dialog box
appears. Click Yes.
The Synchronizing Dialog Box
appears.
A confirmation dialog box
appears. Click Yes.
7. Connection Procedure
19