Handlebar Assembly - LifeFitness INCSC Series Service Manual

Handlebar Assembly

Tools Required:
• Phillips screwdriver
• 5 mm Allen wrench
• 6 mm Allen wrench
Time:
30 minutes (per Handlebar)
Remove Monocolumn Shrouds
1. Pull the right monocolumn shroud up to remove it from the left monocolumn shroud. The right monocolumn
shroud is clipped to the left monocolumn shroud.
2. Use a Phillips screwdriver to remove the two screws securing the left monocolumn shroud to the main shrouds.
Remove Crank Arm
1. Remove crank cap with a flat screwdriver.
2. Remove screw securing crank arm to frame with a 14mm Socket.
3. Remove crank arm with a crank puller.
Repeat for other side.
Remove Frame Shrouds
1. Use a Phillips screwdriver to remove the screws holding the right and left frame shrouds together / to the frame.
Item
1 Shroud, Monocolumn, Right
2 Shroud, Monocolumn, Left
3 M4.2 X Phillips Pan Head Screws
Item
1
2
3
Page 17 of 37
Description
Description
Crank Cap
M8 X 30 Screw
Crank Arm, (with pedal)
Qty.
1
1
2
Qty.
2
2
2