Related Manuals for LifeFitness INRS-SLXX
Summary of Contents for LifeFitness INRS-SLXX
- Page 1 INTEGRITY RECUMBENT LIFECYCLE® EXERCISE BIKE INRS-SLXX, INRD-SLXX, INT-RB, PF-INT-RB, INT-RB-CS, INT-RB-B1, INT-RB- CS-B1 Assembly Instructions 1015936-0001 REV AA...
- Page 3 Corporate Headquarters Columbia Centre III, 9525 Bryn Mawr Avenue, Rosemont, Illinois 60018 • U.S.A. 847.288.3300 • FAX: 847.288.3703 Service phone number: 800.351.3737 (toll-free within U.S.A., Canada) Global Website: www.lifefitness.com International Offices AMERICAS United Kingdom All Other EMEA Countries and Distributor...
- Page 4 User and Service Documents Link https://lifefitness9512.zendesk.com/hc/en-us https://www.lftechsupport.com/web/document-library/documents Additional information is available online using the links above. أ علاه إل ر إبط باستخدإم إ لإ ن تر نت على إضافية معلومات تتوفر 点击上面的链接可在线获取更多信息。 Flere oplysninger er tilgængelige online gennem linket ovenfor. Bijkomende informatie is online beschikbaar via bovenstaande link.
-
Page 5: Table Of Contents
Attach Seat Back and Seat Back Shroud (INT- INRD-SLXX, INT-RB-CS, INT-RB-CS-B1, INT-RB RB-CS, INT-RB-deluxe).......... 28 (deluxe), INT-RB-B1 (deluxe)........ 10 Attach Rear Console Shroud Assembly....29 INRS-SLXX, INT-RB, INT-RB-B1, PF-INT-RB....10 Assembly: INT-RB-B1, INT-RB-CS-B1 Connections..............10 How to Adjust Seat............11 Hardware and Required Tools........30 How to Adjust Pedal Straps........ -
Page 6: Getting Started
1. Getting Started Safety Instructions Read all instructions before use. CAUTION: Any changes or modifications to this equipment could void the product warranty. WARNING: Health-related injuries may result from incorrect or excessive use of exercise equipment. Life Fitness STRONGLY recommends seeing a physician for a complete medical exam before undertaking an exercise program, particularly if the user has a family history of high blood pressure or heart disease, is over the age of 45, smokes, has high cholesterol, is obese, or has not exercised regularly in the past year. - Page 7 • Do not reach into, or underneath, the unit or tip it on its side during operation. • This equipment is not intended for use by children. Keep children under the age of 14 away from the machine. • Do not allow other people to interfere in any way with the user or equipment during a workout. •...
-
Page 8: Consignes De
Consignes de Sécurité Veuillez lire toutes les instructions avant usage. ATTENTION : Toute modification apportée à cet équipement pourrait en annuler la garantie. AVERTISSEMENT : Une utilisation incorrecte ou excessive de l'appareil peut entraîner des blessures. Life Fitness Recommande VIVEMENT aux utilisateurs de passer un examen médical complet avant d'entamer un programme d'entraînement, et tout particulièrement dans les cas suivants : antécédents familiaux d'hypertension (pression sanguine trop élevée) ou de pathologies cardiaques, utilisateurs de 45 ans ou plus, tabagisme, hypercholestérolémie (taux de cholestérol sanguin trop élevé), obésité, absence d'exercice... - Page 9 • Ne placez jamais de liquides d’aucune sorte directement sur l’appareil, sauf si vous disposez d’un support ou d’un plateau pour accessoires. Nous vous recommandons de n’utiliser que des récipients pourvus d’un bouchon. • N’utilisez pas l’appareil avec les pieds nus. Portez toujours des chaussures. Portez des chaussures à semelles en caoutchouc ou antidérapantes.
-
Page 10: Where To Place And How To Stabilize The
Where to Place and How to Stabilize the Recumbent Lifecycle Bike Read the entire manual before setting up the bike. After following all Safety Instructions, move the bike to the location where it will be used. Allow a clearance of 2 ft. (0.6 m) in the directions the bike is accessed from and 3 ft. (1 m) between the front or rear of the bike or any other objects. -
Page 11: Electrical Power Requirements
Electrical Power Requirements (Applicable for Units Using External Power Supply) This unit is self powered or can be used with an optional external power supply. The optional external power supply is required for an attachable TV; no other additional supplies are required. WARNING: Use only the supplied power brick and line cord. -
Page 12: Product Overview
Description Console Wheel Leg Leveler Resistance Up / Down Controls Cup Holders Contact Heart Rate Sensors Seat Adjustment Bar Grip INRS-SLXX, INT-RB, INT-RB-B1, PF-INT-RB Item Description Console Wheel Leg Leveler Seat Adjustment Bar Cup Holder Contact Heart Rate Sensors Connections The following connection receptacle is located at the front of the bike. -
Page 13: How To Adjust
How to Adjust Seat A properly adjusted seat is important in any bike-oriented exercise activity. If the seat is too close, excessive strain will be placed on the knees and quadriceps muscles. If the seat is too far, the resulting reaching action will irritate the feet, ankles, hips and knees. -
Page 14: Schedule
Wipes on the equipment for at least 2 minutes for general disinfection purposes. Contact Customer Support Services to order these cleaners (1-800-351-3737 or email: customersupport@lifefitness.com). Mild soap and water or a mild non-abrasive household cleaner can also be used to clean the display and all exterior surfaces. - Page 15 Troubleshooting the Polar ® Heart Rate Chest Strap Heart rate reading is erratic or absent entirely Probable Cause Corrective Action Belt transmitter electrodes are not wet enough to pick up Wet the belt transmitter electrodes. accurate heart rate readings. Belt transmitter electrodes are not laying flat against the Ensure the belt transmitter electrodes are laying flat skin.
-
Page 16: Troubleshoot The Lifepulse
1. Verify the symptom and review the operating instructions. The problem may be unfamiliarity with the product and its features and workouts. 2. Locate and write down the serial number of the unit which is located on the top right of the front stabilizer. 3. Contact Life Fitness Customer Support Services at http://www.lifefitness.com. Page 14 of 39... -
Page 17: Assembly: Inrs-Slxx, Inrd-Slxx
4. Assembly: INRS-SLXX, INRD-SLXX Hardware and Required Tools Hardware: Item Description Qty. M8 X 20 FLANGE HEX HEAD CAP SCREW INRS-SLXX INRD-SLXX M6 X 16 PHILLIPS PAN HEAD SCREW INRS-SLXX INRD-SLXX GROMMET M5 X 14 PHILLIPS PAN HEAD SCREW M4.2 X 19 PHILLIPS PAN HEAD SCREW... -
Page 18: Attach Seat Weldment To
Attach Seat Weldment to Base 1. Route flat cable through hole. Item Description Qty. Cable 2. Attach seat weldment to base. Item Description Qty. Seat Weldment M8 X 20 Flange Head Cap Screw 37 Nm (27.3 ft. lbs.) Page 16 of 39... -
Page 19: Attach Handlebars
Attach Handlebars NOTE: Connect the cable from the handlebars to the flat cable coming up through the seat weldment. INRS-SLXX INRD-SLXX Item Description Qty. Handlebar Weldment M8 X 20 Flange Head Cap Screw Recumbent Cable Flat Cable 37 Nm (27.3 ft. lbs.) -
Page 20: (Inrs-Slxx)
Attach Cup Holder Shroud (INRS-SLXX) 1. Secure cup holder shroud with two screws. 2. Insert and twist cup holder to lock into place. Item Description Qty. Cup Holder Shroud, Right M8 X 20 Flange Head Cap Screw Cup Holder 13.5 Nm (10 ft. lbs.) Attach Cup Holder Shroud (INRD-SLXX) 1. -
Page 21: Attach Cup Holder Shroud
Attach Seat Back and Seat Back Shroud (INRS-SLXX) 1. Secure seat back to seat weldment using four screws. 2. Secure seat back shroud using four screws. Item Description Qty. Seat Back M8 X 20 Flange Head Cap Screw 13.5 Nm (10 ft. lbs.) -
Page 22: Attach Seat Back And Seat Back Shroud (Inrd-Slxx)
Attach Seat Back and Seat Back Shroud (INRD-SLXX) 1. Secure seat back to seat weldment using four screws. 2. Secure seat back shroud using five screws. Item Description Qty. Seat Back M8 X 20 Flange Head Cap Screw 13.5 Nm (10 ft. lbs.) Seat Back Shroud M6 X 16 Phillips Pan Head Screw 4 Nm (35 in. -
Page 23: Attach Monocolumn To Base
Attach Monocolumn to Base CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment prior to attaching to base! Failure to remove the protective covering can cause improper grounding! INRS-SLXX INRD-SLXX Item Description Qty. Monocolumn M8 Hex Lock Nut 34 Nm ( 25.1 ft. -
Page 24: Attach Right Monocolumn Shroud To Left
Attach Right Monocolumn Shroud to Left Monocolumn Shroud Secure the clips on the right monocolumn shroud into position on the left monocolumn shroud. NOTE: Push gasket down to shrouds. Item Description Qty. Monocolumn Shroud, Right Gasket (attached to monocolumn) Base to Console Cable Connections - Integrity SL Item Description CSAFE... -
Page 25: Assembly
Attach Rear Console Shroud Assembly 1. Slide the clips on top of the rear console shroud assembly into the corresponding slots on the console mounting bracket. 2. Use two screws and two grommets to attach rear console shroud assembly to the corresponding two holes on the console mounting bracket. -
Page 26: Assembly: Int-Rb, Pf-Int-Rb, Int-Rb-Cs
5. Assembly: INT-RB, PF-INT-RB, INT-RB-CS Hardware and Required Tools Hardware: Item Description Qty. M8 X 20 FLANGE HEX HEAD CAP SCREW M6 X 16 PHILLIPS PAN HEAD SCREW INT-RB, PF-INT-RB INT-RB-CS, INT-RB (deluxe) GROMMET M4.2 X 19 PHILLIPS PAN HEAD SCREW M8 HEX LOCK NUT Required Tools: •... -
Page 27: Before You Begin
Before You Begin The monocolumn with console attached is positioned with the back of the console laying on the bike seat. The seat is set to the farthest forward position. 1. Remove velcro strap and discard. 2. Lift the moncoloumn up and turn COUNTERCLOCKWISE. NOTE: DO NOT turn the monocolumn clockwise! Cables may become twisted as a result. -
Page 28: Attach Monocolumn To
Attach Monocolumn to Base CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment prior to attaching to base! Failure to remove the protective covering can cause improper grounding! INT-RB, PF-INT-RB INT-RB-CS, INT-RB (deluxe) Item Description Qty. -
Page 29: Attach Right Monocolumn Shroud To Left
Attach Right Monocolumn Shroud to Left Monocolumn Shroud Secure the clips on the right monocolumn shroud into position on the left monocolumn shroud. NOTE: Push gasket down to shrouds. Item Description Qty. Monocolumn Shroud, Right Gasket (attached to monocolumn) Attach Seat Back and Seat Back Shroud (INT-RB, PF-INT-RB) 1. -
Page 30: Attach Seat Back And Seat Back Shroud (Int-Rb-Cs, Int-Rb-Deluxe)
Attach Seat Back and Seat Back Shroud (INT-RB-CS, INT-RB-deluxe) 1. Secure seat back to seat weldment using four screws. 2. Secure seat back shroud using five screws. Item Description Qty. Seat Back M8 X 20 Flange Head Cap Screw 13.5 Nm (10 ft. lbs.) Seat Back Shroud M6 X 16 Phillips Pan Head Screw 4 Nm (35 in. -
Page 31: Assembly
Attach Rear Console Shroud Assembly 1. Slide the clips on top of the rear console shroud assembly into the corresponding slots on the console mounting bracket. 2. Use two screws and two grommets to attach rear console shroud assembly to the corresponding two holes on the console mounting bracket. -
Page 32: Assembly: Int-Rb-B1, Int-Rb-Cs-B1
6. Assembly: INT-RB-B1, INT-RB-CS-B1 Hardware and Required Tools Hardware: Item Description Qty. M8 X 20 FLANGE HEX HEAD CAP SCREW M6 X 16 PHILLIPS PAN HEAD SCREW INT-RB-B1 INT-RB-CS-B1, INT-RB-B1 (deluxe) GROMMET M5 X 14 PHILLIPS PAN HEAD SCREW M4.2 X 19 PHILLIPS PAN HEAD SCREW M8 HEX LOCK NUT Required Tools: •... -
Page 33: Before You Begin
Before You Begin The monocolumn is positioned with the back of the console support weldment laying on the bike seat. The seat is set to the farthest forward position. 1. Remove velcro strap and discard. 2. Lift the moncoloumn up and turn COUNTERCLOCKWISE. NOTE: DO NOT turn the monocolumn clockwise! Cables may become twisted as a result. -
Page 34: Attach Monocolum To
Attach Monocolum to Base CAUTION: Remove any protective covering / tape from the monocolumn and console support weldment prior to attaching to base! Failure to remove the protective covering can cause improper grounding! NOTE: Route console cables through moncolumn. INT-RB-B1 INT-RB-CS-B1, INT-RB-B1 (deluxe) Description Qty. -
Page 35: Attach Right Monocolumn Shroud To Left
Attach Right Monocolumn Shroud to Left Monocolumn Shroud Secure the clips on the right monocolumn shroud into position on the left monocolumn shroud. NOTE: Push gasket down to shrouds. Item Description Qty. Monocolumn Shroud, Right Gasket (attached to monocolumn) Attach Seat Back and Seat Back Shroud (INT-RB-B1) 1. -
Page 36: Attach Seat Back And Seat Back Shroud
Attach Seat Back and Seat Back Shroud (INT-RB-CS-B1, INT-RB-B1 - deluxe) 1. Secure seat back to seat weldment using four screws. 2. Secure seat back shroud using five screws. Item Description Qty. Seat Back M8 X 20 Flange Head Cap Screw 13.5 Nm (10 ft. -
Page 37: Attach Console - Integrity Sl
Attach Console - Integrity SL Item Description Qty. Console M5 X 14 Phillips Pan Head Screw 1.9 Nm (1.4 ft. lbs.) Page 35 of 39... -
Page 38: Assembly
Attach Rear Console Shroud Assembly 1. Slide the clips on top of the rear console shroud assembly into the corresponding slots on the console mounting bracket. 2. Use two screws and two grommets to attach rear console shroud assembly to the corresponding two holes on the console mounting bracket. -
Page 39: Specifications
Maximum User Weight 400 lbs. / 181 kg 5 in. x 5.5 in. / 12.7 cm x 14 cm (INRS-SLXX, INT-RB, PF-INT-RB, INT-RB-1) Pedal Size 6.56 in. x 5.5 in. / 16.6 cm x 14 cm (INRD-SLXX, INT-RB-CS, INT-RB-CS-B1, INT-RB -... -
Page 40: Warranty
8. Warranty What is Covered This Life Fitness Family of Brands commercial exercise equipment product is warranted to be free of all defects in material and workmanship. Who is Covered The original purchaser or any person receiving the product as a gift from the original purchaser. Warranty will be voided on subsequent transfers. -
Page 41: Effects Of State Laws
Changes in Warranty Not Authorized No one is authorized to change, modify or extend the terms of this limited warranty. Effects of State Laws This warranty gives you specific legal rights, and you may have other rights which vary from state to state and country by country.