Chapter 3 Configuration; Download Rvon-1 Firmware Through Azedit; Appendix A - RTS KP-32 User Manual

Download RVON-1 Firmware Through AZedit

NOTE: AZedit sends firmware directly to the RVON-1 card over Ethernet. This is different from other I/O cards (except the
RVON-8) that receive the firmware from the Master Controller. For this reason, verify the PC running AZedit is able to contact
the RVON-1 card via the network, or is configured with a Gateway IP Address that can contact the RVON card. If it is not,
AZedit will not be able to find the RVON-8 card. To test the connection, pin the RVON card from a command line. For more
information on how to test for a connection, see Appendix A.
To download the RVON-1 Firmware, do the following:
Open AZedit.
1.
From the Status menu, select Software Versions and then Keypanels.
2.
The Keypanel Version screen appears.
On the Keypanel Version screen, select the Show RVON-1 Versions check box.
3.
Select and right click the keypanel which has the RVON-1 installed, and then select Download RVON-1.
4.
The Download Device Firmware screen appears.
CHAPTER 3
Configuration
13