(e.g. Serious Adverse Event); this information • AA-12CSB Case Stand-Off Bracket shall be reported immediately to Aseptico Inc. • Two (2) Extra Fuses Each for 115V (PN 830146) & 230V (PN and/or the Authorized Representative (within 830147) the European Union).
A pressurized water tank supplies Unlatch and open the case. Install AA-12CSB Bracket to hold water for handpiece coolant and syringe. The Task Force Deluxe up case lid. (Figure 1) is powered by a switchable dual voltage oilless air compressor.
Page 4
Remove the cap from the white plastic water supply tank and fill with clean water. Reinstall the cap and place water supply tank into retainer strap inside Task Force Deluxe case. Attach the saliva ejector hose onto the top of the waste container by pushing in and rotating 1/4 turn (Figure 8).
OPERATION: Water Coolant On/Off Toggle Switch FOOT SWITCH: All Task Force Deluxe system components are activated by Water Coolant the on/off foot switch. The foot switch enables the operation Flow Control Handpiece Selection of the handpieces, saliva ejector and the 3-way air/water...
MAINTENANCE: Depressurize water supply tank by turning off tank Because of its simple design, the Aseptico ADU-12DCE Task pressure toggle switch. Force Deluxe requires very little maintenance. Any maintenance Check that fuse is correct for source voltage.
(90) days from the date of return to Aseptico, whichever is later. This limited warranty applies only to the initial or first installation of the product or part.
Page 8
P.O. Box 1548 • Woodinville, WA 98072 8333 216th Street SE • Woodinville, WA 98072 (425) 487-3157 • (800) 426-5913 www.aseptico.com • info@aseptico.com P/N: 420554 Rev. N ECO 15698 PRINTED IN THE 07/2023 U.S.A.
Need help?
Do you have a question about the Task Force Deluxe and is the answer not in the manual?
Questions and answers