Reversing Release Solenoid (Mfc-8840D/8840Dn, Dcp-8045D/8045Dn Only) - Brother MFC8440D Service Manual

7/13/2019
CHAPTER 4 DISASSEMBLY AND RE-ASSEMBLY
3.30

Reversing Release Solenoid (MFC-8840D/8840DN, DCP-8045D/8045DN only)

(1) Remove the two bind B M4x12 Taptite screws, and then remove the PCP case.
(2) Remove the two bind B M4x12 Taptite screws, and then remove the eject gear frame unit.
Eject gear frame unit
Taptite, bind B M4x12
PCP case
Taptite, bind B
M4x12
(3) Remove the switch arm return spring and sector gear spring.
(4) Remove the idle gear and switch arm ASSY.
(5) Remove the reversing sector gear and release solenoid lever.
(6) Remove the bind B M3x4 Taptite screw, and then remove the reversing release solenoid
and solenoid release spring.
Switch arm ASSY
Reversing sector gear
Eject gear frame
http://slidepdf.com/reader/full/brother-8840d-service-manual
Fig. 4-147
Hook
Taptite, bind B M3x4
Fig. 4-148
4-82
Brother 8840D Service Manual
Gear A
Gear B
Switch arm return spring
Idle gear
Hooks
Sector gear spring
Release solenoid lever
Reversing release solenoid
Frame L
Solenoid release spring
163/361