7/13/2019
APPENDIX 3 FIRMWARE SWITCHS (WSW)
Selector
No.
1
2
3
4
5
|
8
NOTE:
Selector 3 is applicable only to models equipped with a parallel interface.
•
Selectors 6 through 8 are applicable only to models equipped with a flat-bed scanner.
•
Selectors 1 and 2: Monitoring the PC ON/OFF state
For the related functions, refer to WSW36, selectors 2 and 3.
Selectors 3: Parallel port output pins kept at high level
Setting this selector to "0" will keep all parallel output pins of the facsimile equipment at high
level. Use this setting if Resource Manager (bundled with MFC models) installed to Windows
NT running on the connected PC fails to monitor the power ON/OFF state of the facsimile
equipment.
Selector
No.
1
|
7
8
http://slidepdf.com/reader/full/brother-8840d-service-manual
WSW46 (Monitor of PC ON/OFF state)
Function
Monitoring the PC ON/OFF state
Parallel port output pins kept at high
level
Scanned garbage correction
processing
Not used.
WSW47 (Function setting 22)
Function
Not used.
Switching of USB High/Full Speed
Brother 8840D Service Manual
Setting and Specifications
No. 1 2
0 0 :
Disabled
0 1 :
Monitor SELECT IN
1 0 :
Monitor STROBE
1 1 :
0:
Enabled
0:
ON
Setting and Specifications
0:
Auto (Automatic switching)
1:
Full speed is set.
A-48
Monitor both SELECT IN and
STROBE
1:
Disabled
1:
OFF
341/361