7/13/2019
(2)
Change the detecting conditions to check that the indication on the LCD changes
according to the sensor states. For instance, insert paper through the document front
(or rear) sensor or the registration sensor (s), open the front cover or the document
cover, remove the toner cartridge, jam paper at the paper outlet, insert paper from the
manual feeder, and load a recording paper tray, etc.
(3)
Press the Stop button. The machine beeps for one second and return to the initial
stage of the maintenance mode.
NOTE:
If you have opened and closed the front cover during the above procedure, you need to
open and close the front cover again upon completion of the procedure.
http://slidepdf.com/reader/full/brother-8840d-service-manual
Brother 8840D Service Manual
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
7-15
SERVICE MANUAL
281/361