Adapter And Switch Compatibility; System Components - Silicon Graphics InfiniteStorage TP9300 User Manual

1: Introduction to the SGI InfiniteStorage TP9300 and TP9300S

Adapter and Switch Compatibility

System Components

6
The TP9300 supports the following host bus adapters (HBAs) and switches:
Note: The TP9300 does not support copper Fibre Channel HBAs.
• QLogic 2200 optical 33/66-MHz HBA
• QLogic 2310 optical 66-MHz HBA
• QLogic 2342 optical 66-MHz dual channel HBA
• Brocade family SAN switches
– SilkWorm 2400 1-Gb/s 8-port switch
– SilkWorm 2800 1-Gb/s 16-port switch
– SilkWorm 3200 2-Gb/s 8-port switch
– SilkWorm 3800 2 Gb/s 16-port switch
– SilkWorm 3900 2-Gb/s 32-port switch
– SilkWorm 12000 2-Gb/s 64-port switch
• IRIX release level 6.5.21 or later
This section contains pictures and brief descriptions of the components that make up the
TP9300 in the following sections:
• "Storage Enclosures" on page 7
• "TP9300 Rack" on page 9
007-4644-003