Table of Contents
Advertisement
Accessories
Wire rack
Universal pan
Baking tray
5.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
5.2 Sliding accessories into the cooking
compartment
Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.
1.
Turn the accessories so that the notch
rear and is facing downwards.
2.
Insert accessories between the two guide rods for
the shelf position.
Wire rack
Baking tray
E.g. univer-
sal pan or
baking tray
is at the
3.
Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
1.
Place the wire rack on the universal pan so that
both spacers
sal pan.
2.
Insert the universal pan between the two guide rods
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Use
¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catching dripping liquids, e.g. fat when
grilling food on the wire rack.
¡ Tray bakes
¡ Small baked items
Insert the wire rack with the open
side facing the appliance door and
the curved lip
Slide the tray, e.g. the universal pan,
in with the sloping edge
appliance door.
are on the rear edge of the univer-
Accessories en
facing downwards.
facing the
9
Advertisement
Table of Contents
