en Appliance door
17.3 Removing the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
1.
Open the appliance door slightly.
2.
Push on the left- and right-hand side of the door
cover from the outside
3.
Remove the door cover .
4.
Clean the door cover.
→ "Suitable cleaning agents", Page 16
5.
Undoing and removing the left- and right-hand
screws on the appliance door
6.
Place a folded-up tea towel in the appliance door.
Pull the front pane up and out
7.
Set the front pane down on a level surface with the
door handle facing down.
22
until it is released.
.
8.
Press the intermediate pane against the appliance
with one hand while pushing the left- and right-hand
retainers
upwards. Do not detach the retainers
9.
Remove the intermediate pane.
10.
WARNING ‒ Risk of injury!
Scratched glass in the appliance door may develop
into a crack.
Do not use any harsh or abrasive cleaners or
▶
sharp metal scrapers to clean the glass on the
oven door, as they may scratch the surface.
Clean the removed door panes on both sides with
glass cleaner and a soft cloth.
11.
Clean the appliance door.
→ "Suitable cleaning agents", Page 16
12.
Dry the door panes and refit them.
→ "Fitting the door panes", Page 22
17.4 Fitting the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
1.
Turn the intermediate pane until the arrow
the top right.
2.
Insert
the intermediate pane into the retainer
the bottom and push it in firmly at the top.
.
is in
at