Table of Contents
Advertisement
Changing the temperature
You can change the temperature at any time.
▶
Use the
or
buttons to select a temperature or
grill setting.
Changing the type of heating
You can change the type of heating at any time. If this
is changed while the oven is operating, this operation
is paused.
1.
Touch
.
2.
Use
or
to programme a type of heating.
3.
Touch
.
Pausing or cancelling operation
You can briefly pause the function and then continue. If
you cancel the function completely, the settings are re-
set.
8 Rapid heating
Rapid heating is possible for the following types of
heating:
¡ 3D hot air
¡ Top/bottom heating
8.1 Setting rapid heating
To ensure an even cooking result, do not place the
food in the cooking compartment until rapid heating
has come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of
at least 100 °C.
9 Time-setting options
Your appliance has different time-setting options, with
which you can control its operation.
9.1 Overview of the time-setting options
With the
button, select the different time-setting op-
tions.
Time-setting
Use
option
Timer
The timer can be set independently
of the appliance when it is in opera-
tion. It does not affect the appliance.
Cooking time
If you set a cooking time, operation
of the appliance stops automatically
once this time has elapsed.
End time
For the cooking time, you can set the
time at which operation ends. The
appliance starts up automatically so
that it finishes cooking at the re-
quired time.
Time
You can set the time.
1.
To pause the operation:
Touch
. The oven is paused.
‒
Touch
to end the pause.
‒
2.
To cancel a function:
Press and hold
‒
a The function is interrupted and all settings are reset.
7.3 Starting the appliance
You must start each operating mode.
▶
Touch
.
7.4 Switching off the appliance
▶
Touch
.
a The appliance is switched off.
Rapid heating automatically switches off at temper-
atures of 200 °C and above.
2.
If rapid heating does not switch off automatically,
press the
button.
a
appears in the display.
a Rapid heating starts after a few seconds.
a Once rapid heating has ended, a signal tone
sounds and the
symbol goes out on the display.
3.
Place the food in the cooking compartment.
Cancelling rapid heating
▶
Press the
button.
a The
symbol disappears from the display.
9.2 Setting the timer
The timer runs independently of the appliance when it
is in operation. The timer can be set when the appli-
ance is switched on or off, up to 23 hours and 59
minutes. The timer has its own audible signal so that
you can tell whether it is the timer or a cooking time
which has elapsed.
1.
Press the
button repeatedly until
in the display.
2.
Use the
or
button to set the timer duration.
Button
Default value
5 minutes
10 minutes
The timer duration can be set in 30-second incre-
ments up to 10 minutes. Above 10 minutes, the
time increments become longer the higher the
value.
Rapid heating en
.
is highlighted
11
Advertisement
Table of Contents
