Table of Contents
Advertisement
en Before using for the first time
Wire rack
on univer-
sal pan
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
6.1 Initial use
You need to make settings for initial use before you
can use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
1.
Use the
or
button to set the time.
2.
Press the
button.
a The time that is set appears in the display.
Tip: You can go to the basic settings → Page 15 to
specify whether or not the time should be shown on
the display.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories be-
fore using the appliance to prepare food for the first
time.
1.
Remove any accessories and leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
7 Basic operation
7.1 Switching on the appliance
▶
Touch
.
a The appliance is switched on.
a The preset type of heating lights up on the display
panel.
7.2 Setting the type of heating and the
temperature
1.
Use
or
to select a type of heating.
You can also select the types of heating by
‒
touching
.
10
5.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
siemens-home.bsh-group.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
2.
Before heating the appliance, wipe the smooth sur-
faces in the cooking compartment with a soft, damp
cloth.
3.
Keep the room ventilated while the appliance is
heating.
4.
Set the type of heating and temperature.
→ "Basic operation", Page 10
Type of heat-
3D hot air
ing
Temperature
Maximum
Cooking time
1 hour
5.
Switch off the appliance after the specified cooking
time.
6.
Wait until the cooking compartment has cooled
down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
8.
Clean the accessories using soapy water and a dish
cloth or soft brush.
2.
Touch
.
3.
Use
or
to select a temperature or grill setting.
4.
Touch
.
a The appliance starts heating after a few seconds.
5.
When the food is ready, switch off the appliance.
Tips
¡ The most suitable type of heating for your food can
be found in the type of heating description .
¡ You can also set a cooking time and end time on
the appliance.
→ "Time-setting options", Page 11
Advertisement
Table of Contents
