Table of Contents
Advertisement
Chapter 2
Installation and Configuration
1 Module Cooling Air Outlets
Rack Mounting
You may wish to remove the feet from your PXI-1000 when rack mounting. To do
Note
so, remove the two screws holding the feet in place.
Setting Fan Speed
PXI-1000 User Manual
1
Figure 2-1. PXI-1000 Mainframe Airflow Side View
Install your mainframe so that you can easily access the rear panel. This
simplifies the replacement of the air filters or power supply/fan assembly,
if necessary.
Rack-mount applications require the optional rack-mount kit available
from National Instruments. Refer to the instructions supplied with the
rack-mount kit to install your PXI-1000 in an instrument rack.
The fan speed selector switch is located on the rear panel of the PXI-1000.
Refer to Figure 1-2,
Rear View of the PXI-1000
of the fan speed selector. Select HI for maximum cooling effectiveness
(recommended) or LO for more quiet operation.
2 Module Cooling Air Intake
2-2
2
Mainframe, for a diagram
© National Instruments Corporation
Advertisement
Table of Contents
